Free Santa hat SVG

Christmas hat from the front SVG

Christmas hat from the front, as a solid black shape — Christmas hat from the front. The preview is the SVG file itself.

An upright hat seen from the front, with the pompom on top and a tufted fur brim. It is the same on both sides, so it sits squarely on a round face or a jar lid.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	87 × 100 mm (3.41 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	461 mm at this size
Narrowest part	2.7 mm at this size
Nodes	61 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,744 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.87 × 1 in (22 × 25 mm)	0.69 mm	117 mm	110	Fine detail: vinyl and paper only, weed with care
1.73 × 2 in (44 × 51 mm)	1.4 mm	234 mm	30	Vinyl, card and thin sheet
2.6 × 3 in (66 × 76 mm)	2.1 mm	351 mm	12	Vinyl, card and thin sheet
3.47 × 4 in (88 × 102 mm)	2.7 mm	468 mm	6	Vinyl, card and thin sheet
5.2 × 6 in (132 × 152 mm)	4.1 mm	703 mm	2	Any material, including 3 mm wood and acrylic
6.94 × 8 in (176 × 203 mm)	5.5 mm	937 mm	1	Any material, including 3 mm wood and acrylic
10.4 × 12 in (264 × 305 mm)	8.2 mm	1,405 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Santa hat SVG files

← Santa hat with a long tail All 12 Santa hats Santa hat outline →