Santa hat and beard SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A Santa face with no face: the hat, a curly moustache and a full scalloped beard round an open space. It reads as Santa at a glance and cuts as one piece.
What is in the file
| Size | 68 × 100 mm (2.67 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 4: 1 outer edge and 3 cut-outs |
| Cut length | 599 mm at this size |
| Narrowest part | 1.3 mm at this size |
| Nodes | 89 curve and line segments |
Measured from the file. PNG: 1,381 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.68 × 1 in (17 × 25 mm) | 0.33 mm | 152 mm | 130 | Too fine for most machines |
| 1.36 × 2 in (34 × 51 mm) | 0.66 mm | 304 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 2.03 × 3 in (52 × 76 mm) | 0.99 mm | 456 mm | 15 | Fine detail: vinyl and paper only, weed with care |
| 2.71 × 4 in (69 × 102 mm) | 1.3 mm | 609 mm | 8 | Vinyl, card and thin sheet |
| 4.07 × 6 in (103 × 152 mm) | 2 mm | 913 mm | 2 | Vinyl, card and thin sheet |
| 5.42 × 8 in (138 × 203 mm) | 2.6 mm | 1,217 mm | 2 | Vinyl, card and thin sheet |
| 8.14 × 12 in (207 × 305 mm) | 4 mm | 1,826 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Santa hat SVG files
-
Classic Santa hat Solid · one piece
-
Simple Santa hat Solid · one piece
-
Santa hat with a long tail Solid · one piece
-
Christmas hat from the front Solid · one piece
-
Santa hat outline Outline · one piece
-
Simple Santa hat outline Outline · one piece
-
Santa hat in three pieces Solid · 3 pieces
-
Santa hat with star cut-outs Solid · one piece
← Tilted Santa hat for a letter All 12 Santa hats Classic Santa hat →