Free Santa hat SVG

Santa hat in three pieces SVG

Santa hat in three pieces, as a solid black shape — Santa hat in three pieces. The preview is the SVG file itself.

The cone, the fur brim and the pompom as three loose pieces, set a little apart. Cut the cone in red and the other two in white, then overlap them.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 94 mm (3.94 × 3.7 in), scales to any size
Pieces	3 separate pieces
Outlines to cut	3 outlines
Cut length	572 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	71 curve and line segments

Measured from the file. PNG: 2,000 × 1,885 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.94 in (25 × 24 mm)	Over 1.5 mm	145 mm	100	Vinyl, card and thin sheet
2 × 1.88 in (51 × 48 mm)	Over 3 mm	291 mm	25	Any material, including 3 mm wood and acrylic
3 × 2.82 in (76 × 72 mm)	Over 4.6 mm	436 mm	12	Any material, including 3 mm wood and acrylic
4 × 3.76 in (102 × 96 mm)	Over 6.1 mm	581 mm	6	Any material, including 3 mm wood and acrylic
6 × 5.64 in (152 × 143 mm)	Over 9.1 mm	872 mm	2	Any material, including 3 mm wood and acrylic
8 × 7.52 in (203 × 191 mm)	Over 12 mm	1,162 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.28 in (305 × 287 mm)	Over 18 mm	1,743 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Santa hat SVG files

← Simple Santa hat outline All 12 Santa hats Santa hat with star cut-outs →