Free Santa hat SVG

Santa hat with star cut-outs SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Santa hat with star cut-outs, as a solid black shape
Santa hat with star cut-outs. The preview is the SVG file itself.

The short hat with a tufted brim and three five-pointed stars cut from the cloth. Back the stars with gold or glitter card.

What is in the file

Size100 × 81 mm (3.94 × 3.19 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length683 mm at this size
Narrowest part4 mm at this size
Nodes110 curve and line segments
Also found asCute Santa hat SVG

Measured from the file. PNG: 2,000 × 1,637 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.81 in (25 × 21 mm)1 mm173 mm120Vinyl, card and thin sheet
2 × 1.62 in (51 × 41 mm)2 mm347 mm30Vinyl, card and thin sheet
3 × 2.43 in (76 × 62 mm)3 mm520 mm12Any material, including 3 mm wood and acrylic
4 × 3.24 in (102 × 82 mm)4.1 mm694 mm6Any material, including 3 mm wood and acrylic
6 × 4.87 in (152 × 124 mm)6.1 mm1,041 mm2Any material, including 3 mm wood and acrylic
8 × 6.49 in (203 × 165 mm)8.1 mm1,388 mm1Any material, including 3 mm wood and acrylic
12 × 9.73 in (305 × 247 mm)12 mm2,082 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Santa hat SVG files

← Santa hat in three pieces All 12 Santa hats Striped Christmas hat →