Free Santa hat SVG

Striped Christmas hat SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Striped Christmas hat, as a solid black shape
Striped Christmas hat. The preview is the SVG file itself.

The front view hat with four curved stripes cut across the cone, like a knitted hat. The stripes stop short of the edges, so it holds together.

What is in the file

Size87 × 100 mm (3.41 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length751 mm at this size
Narrowest part3.7 mm at this size
Nodes87 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,744 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.87 × 1 in (22 × 25 mm)0.94 mm191 mm110Fine detail: vinyl and paper only, weed with care
1.73 × 2 in (44 × 51 mm)1.9 mm382 mm30Vinyl, card and thin sheet
2.6 × 3 in (66 × 76 mm)2.8 mm572 mm12Vinyl, card and thin sheet
3.47 × 4 in (88 × 102 mm)3.8 mm763 mm6Any material, including 3 mm wood and acrylic
5.2 × 6 in (132 × 152 mm)5.6 mm1,145 mm2Any material, including 3 mm wood and acrylic
6.94 × 8 in (176 × 203 mm)7.5 mm1,526 mm1Any material, including 3 mm wood and acrylic
10.4 × 12 in (264 × 305 mm)11 mm2,289 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Santa hat SVG files

← Santa hat with star cut-outs All 12 Santa hats Santa hat with holly →