Free Rip Some Lip SVG

Rip Some Lip stencil plate SVG

Rip Some Lip stencil plate, as a solid black shape — Rip Some Lip stencil plate. The preview is the SVG file itself.

A rounded plate with “RIP SOME LIP” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 95 mm (3.94 × 3.72 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	11: 1 outer edge and 10 cut-outs
Cut length	1,432 mm at this size
Narrowest part	1.7 mm at this size
Nodes	228 curve and line segments

Measured from the file. PNG: 2,000 × 1,894 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.95 in (25 × 24 mm)	0.43 mm	364 mm	100	Too fine for most machines
2 × 1.89 in (51 × 48 mm)	0.86 mm	727 mm	25	Fine detail: vinyl and paper only, weed with care
3 × 2.83 in (76 × 72 mm)	1.3 mm	1,091 mm	12	Vinyl, card and thin sheet
4 × 3.78 in (102 × 96 mm)	1.7 mm	1,455 mm	6	Vinyl, card and thin sheet
6 × 5.67 in (152 × 144 mm)	2.6 mm	2,182 mm	2	Vinyl, card and thin sheet
8 × 7.56 in (203 × 192 mm)	3.5 mm	2,910 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.34 in (305 × 288 mm)	5.2 mm	4,365 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Rip Some Lip SVG files

← Rip Some Lip outline lettering All 12 Rip Some Lip designs Rip Some Lip with a drop shadow →