Rip Some Lip in Lobster SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Rip Some Lip” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.
What is in the file
| Size | 100 × 71 mm (3.94 × 2.8 in), scales to any size |
|---|---|
| Pieces | 7 separate pieces |
| Outlines to cut | 11: 7 outer edges and 4 cut-outs |
| Cut length | 897 mm at this size |
| Narrowest part | 1.2 mm at this size |
| Nodes | 222 curve and line segments |
Measured from the file. PNG: 2,000 × 1,442 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.71 in (25 × 18 mm) | 0.3 mm | 228 mm | 130 | Too fine for most machines |
| 2 × 1.42 in (51 × 36 mm) | 0.61 mm | 456 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.13 in (76 × 54 mm) | 0.91 mm | 684 mm | 15 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.84 in (102 × 72 mm) | 1.2 mm | 911 mm | 8 | Vinyl, card and thin sheet |
| 6 × 4.26 in (152 × 108 mm) | 1.8 mm | 1,367 mm | 2 | Vinyl, card and thin sheet |
| 8 × 5.68 in (203 × 144 mm) | 2.4 mm | 1,823 mm | 2 | Vinyl, card and thin sheet |
| 12 × 8.52 in (305 × 216 mm) | 3.7 mm | 2,734 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Rip Some Lip SVG files
-
Rip Some Lip in Kaushan Script Solid · 12 pieces
-
Rip Some Lip in Lilita One Solid · 12 pieces
-
Rip Some Lip in Alfa Slab One Solid · 12 pieces
-
Rip Some Lip in Amatic SC Solid · 10 pieces
-
Rip Some Lip in block capitals Solid · 10 pieces
-
Rip Some Lip in script and capitals Solid · 9 pieces
-
Rip Some Lip with stars Solid · 13 pieces
-
Rip Some Lip outline lettering Outline · 15 pieces
← Rip Some Lip in Pacifico All 13 Rip Some Lip designs Rip Some Lip in Kaushan Script →