Rip Some Lip with stars SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Rip Some Lip” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.
What is in the file
| Size | 97 × 100 mm (3.81 × 3.94 in), scales to any size |
|---|---|
| Pieces | 13 separate pieces |
| Outlines to cut | 17: 13 outer edges and 4 cut-outs |
| Cut length | 1,098 mm at this size |
| Narrowest part | 1.2 mm at this size |
| Nodes | 280 curve and line segments |
Measured from the file. PNG: 1,940 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.97 × 1 in (25 × 25 mm) | 0.3 mm | 279 mm | 100 | Too fine for most machines |
| 1.94 × 2 in (49 × 51 mm) | 0.61 mm | 558 mm | 25 | Fine detail: vinyl and paper only, weed with care |
| 2.91 × 3 in (74 × 76 mm) | 0.91 mm | 837 mm | 9 | Fine detail: vinyl and paper only, weed with care |
| 3.88 × 4 in (98 × 102 mm) | 1.2 mm | 1,116 mm | 4 | Vinyl, card and thin sheet |
| 5.81 × 6 in (148 × 152 mm) | 1.8 mm | 1,673 mm | 2 | Vinyl, card and thin sheet |
| 7.75 × 8 in (197 × 203 mm) | 2.4 mm | 2,231 mm | 1 | Vinyl, card and thin sheet |
| 11.63 × 12 in (295 × 305 mm) | 3.7 mm | 3,347 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Rip Some Lip SVG files
-
Rip Some Lip outline lettering Outline · 15 pieces
-
Rip Some Lip stencil plate Solid · one piece
-
Rip Some Lip with a drop shadow Layered · 8 pieces
-
Rip Some Lip with a bass Solid · 10 pieces
-
Rip Some Lip in Pacifico Solid · 6 pieces
-
Rip Some Lip in Lobster Solid · 7 pieces
-
Rip Some Lip in Kaushan Script Solid · 12 pieces
-
Rip Some Lip in Lilita One Solid · 12 pieces
← Rip Some Lip in script and capitals All 13 Rip Some Lip designs Rip Some Lip outline lettering →