Free Rip Some Lip SVG

Rip Some Lip outline lettering SVG

Rip Some Lip outline lettering, drawn as a line — Rip Some Lip outline lettering. The preview is the SVG file itself.

“Rip Some Lip” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 51 mm (3.94 × 1.99 in), scales to any size
Pieces	15 separate pieces
Outlines to cut	32: 15 outer edges and 17 cut-outs
Cut length	1,157 mm at this size
Narrowest part	1.4 mm at this size
Nodes	360 curve and line segments

Measured from the file. PNG: 2,000 × 1,050 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.51 in (25 × 13 mm)	0.36 mm	294 mm	170	Too fine for most machines
2 × 1.01 in (51 × 26 mm)	0.71 mm	588 mm	50	Fine detail: vinyl and paper only, weed with care
3 × 1.52 in (76 × 39 mm)	1.1 mm	882 mm	21	Vinyl, card and thin sheet
4 × 2.02 in (102 × 51 mm)	1.4 mm	1,176 mm	10	Vinyl, card and thin sheet
6 × 3.04 in (152 × 77 mm)	2.1 mm	1,763 mm	3	Vinyl, card and thin sheet
8 × 4.05 in (203 × 103 mm)	2.8 mm	2,351 mm	2	Vinyl, card and thin sheet
12 × 6.07 in (305 × 154 mm)	4.3 mm	3,527 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Rip Some Lip SVG files

← Rip Some Lip with stars All 12 Rip Some Lip designs Rip Some Lip stencil plate →