Free Rip Some Lip SVG

Rip Some Lip in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Rip Some Lip in Alfa Slab One, as a solid black shape
Rip Some Lip in Alfa Slab One. The preview is the SVG file itself.

“Rip Some Lip” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 45 mm (3.94 × 1.78 in), scales to any size
Pieces12 separate pieces
Outlines to cut17: 12 outer edges and 5 cut-outs
Cut length705 mm at this size
Narrowest part1.8 mm at this size
Nodes213 curve and line segments

Measured from the file. PNG: 2,000 × 946 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.45 in (25 × 11 mm)0.46 mm179 mm180Too fine for most machines
2 × 0.9 in (51 × 23 mm)0.91 mm358 mm55Fine detail: vinyl and paper only, weed with care
3 × 1.36 in (76 × 34 mm)1.4 mm537 mm21Vinyl, card and thin sheet
4 × 1.81 in (102 × 46 mm)1.8 mm716 mm12Vinyl, card and thin sheet
6 × 2.71 in (152 × 69 mm)2.7 mm1,074 mm4Vinyl, card and thin sheet
8 × 3.62 in (203 × 92 mm)3.7 mm1,433 mm3Any material, including 3 mm wood and acrylic
12 × 5.42 in (305 × 138 mm)5.5 mm2,149 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Rip Some Lip SVG files

← Rip Some Lip in Lilita One All 13 Rip Some Lip designs Rip Some Lip in Amatic SC →