Rip Some Lip with a drop shadow SVG
“Rip Some Lip” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 74 mm (3.94 × 2.93 in), scales to any size |
|---|---|
| Pieces | 8 separate pieces |
| Outlines to cut | 24: 8 outer edges and 16 cut-outs |
| Cut length | 1,432 mm at this size |
| Narrowest part | 2.2 mm at this size |
| Nodes | 530 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,506 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.74 in (25 × 19 mm) | 0.56 mm | 364 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.49 in (51 × 38 mm) | 1.1 mm | 727 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.23 in (76 × 57 mm) | 1.7 mm | 1,091 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.97 in (102 × 75 mm) | 2.2 mm | 1,455 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.46 in (152 × 113 mm) | 3.4 mm | 2,182 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.94 in (203 × 151 mm) | 4.5 mm | 2,910 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 8.92 in (305 × 226 mm) | 6.7 mm | 4,365 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Rip Some Lip SVG files
-
Rip Some Lip in Pacifico Solid · 6 pieces -
Rip Some Lip in Lobster Solid · 7 pieces -
Rip Some Lip in Kaushan Script Solid · 12 pieces -
Rip Some Lip in Lilita One Solid · 12 pieces -
Rip Some Lip in Alfa Slab One Solid · 12 pieces -
Rip Some Lip in Amatic SC Solid · 10 pieces -
Rip Some Lip in block capitals Solid · 10 pieces -
Rip Some Lip in script and capitals Solid · 9 pieces
← Rip Some Lip stencil plate All 12 Rip Some Lip designs Rip Some Lip in Pacifico →