Free Rip Some Lip SVG

Rip Some Lip in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Rip Some Lip in Amatic SC, as a solid black shape
Rip Some Lip in Amatic SC. The preview is the SVG file itself.

“Rip Some Lip” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 86 mm (3.94 × 3.39 in), scales to any size
Pieces10 separate pieces
Outlines to cut14: 10 outer edges and 4 cut-outs
Cut length1,112 mm at this size
Narrowest part2 mm at this size
Nodes334 curve and line segments

Measured from the file. PNG: 2,000 × 1,731 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.86 in (25 × 22 mm)0.51 mm282 mm110Fine detail: vinyl and paper only, weed with care
2 × 1.72 in (51 × 44 mm)1 mm565 mm30Vinyl, card and thin sheet
3 × 2.58 in (76 × 66 mm)1.5 mm847 mm12Vinyl, card and thin sheet
4 × 3.44 in (102 × 87 mm)2 mm1,130 mm6Vinyl, card and thin sheet
6 × 5.16 in (152 × 131 mm)3 mm1,695 mm2Any material, including 3 mm wood and acrylic
8 × 6.88 in (203 × 175 mm)4.1 mm2,260 mm1Any material, including 3 mm wood and acrylic
12 × 10.32 in (305 × 262 mm)6.1 mm3,389 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Rip Some Lip SVG files

← Rip Some Lip in Alfa Slab One All 13 Rip Some Lip designs Rip Some Lip in block capitals →