Rip Some Lip in Pacifico SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Rip Some Lip” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.
What is in the file
| Size | 100 × 74 mm (3.94 × 2.89 in), scales to any size |
|---|---|
| Pieces | 6 separate pieces |
| Outlines to cut | 13: 6 outer edges and 7 cut-outs |
| Cut length | 854 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 279 curve and line segments |
Measured from the file. PNG: 2,000 × 1,490 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.74 in (25 × 19 mm) | 0.43 mm | 217 mm | 130 | Too fine for most machines |
| 2 × 1.47 in (51 × 37 mm) | 0.86 mm | 434 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.2 in (76 × 56 mm) | 1.3 mm | 651 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.94 in (102 × 75 mm) | 1.7 mm | 868 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.41 in (152 × 112 mm) | 2.6 mm | 1,301 mm | 2 | Vinyl, card and thin sheet |
| 8 × 5.88 in (203 × 149 mm) | 3.5 mm | 1,735 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.82 in (305 × 224 mm) | 5.2 mm | 2,603 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Rip Some Lip SVG files
-
Rip Some Lip in Lobster Solid · 7 pieces
-
Rip Some Lip in Kaushan Script Solid · 12 pieces
-
Rip Some Lip in Lilita One Solid · 12 pieces
-
Rip Some Lip in Alfa Slab One Solid · 12 pieces
-
Rip Some Lip in Amatic SC Solid · 10 pieces
-
Rip Some Lip in block capitals Solid · 10 pieces
-
Rip Some Lip in script and capitals Solid · 9 pieces
-
Rip Some Lip with stars Solid · 13 pieces
← Rip Some Lip with a bass All 13 Rip Some Lip designs Rip Some Lip in Lobster →