Rip Some Lip with a bass SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Rip Some Lip” with a bass above the words: the first line in Pacifico script, the rest in narrow capitals, the lines made the same width. The picture is a separate piece, so it can be cut in a second colour or left off.
What is in the file
| Size | 63 × 100 mm (2.5 × 3.94 in), scales to any size |
|---|---|
| Pieces | 10 separate pieces |
| Outlines to cut | 28: 10 outer edges and 18 cut-outs |
| Cut length | 1,164 mm at this size |
| Narrowest part | 0.7 mm at this size |
| Nodes | 344 curve and line segments |
Measured from the file. PNG: 1,296 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.63 × 1 in (16 × 25 mm) | 0.18 mm | 296 mm | 140 | Too fine for most machines |
| 1.27 × 2 in (32 × 51 mm) | 0.36 mm | 591 mm | 40 | Too fine for most machines |
| 1.9 × 3 in (48 × 76 mm) | 0.53 mm | 887 mm | 15 | Fine detail: vinyl and paper only, weed with care |
| 2.54 × 4 in (64 × 102 mm) | 0.71 mm | 1,183 mm | 8 | Fine detail: vinyl and paper only, weed with care |
| 3.8 × 6 in (97 × 152 mm) | 1.1 mm | 1,774 mm | 3 | Vinyl, card and thin sheet |
| 5.07 × 8 in (129 × 203 mm) | 1.4 mm | 2,365 mm | 2 | Vinyl, card and thin sheet |
| 7.61 × 12 in (193 × 305 mm) | 2.1 mm | 3,548 mm | 1 | Vinyl, card and thin sheet |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Rip Some Lip SVG files
-
Rip Some Lip in Pacifico Solid · 6 pieces -
Rip Some Lip in Lobster Solid · 7 pieces -
Rip Some Lip in Kaushan Script Solid · 12 pieces -
Rip Some Lip in Lilita One Solid · 12 pieces -
Rip Some Lip in Alfa Slab One Solid · 12 pieces -
Rip Some Lip in Amatic SC Solid · 10 pieces -
Rip Some Lip in block capitals Solid · 10 pieces -
Rip Some Lip in script and capitals Solid · 9 pieces
← Rip Some Lip with a drop shadow All 13 Rip Some Lip designs Rip Some Lip in Pacifico →