Rip Some Lip in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Rip Some Lip” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 53 mm (3.94 × 2.1 in), scales to any size |
|---|---|
| Pieces | 12 separate pieces |
| Outlines to cut | 17: 12 outer edges and 5 cut-outs |
| Cut length | 685 mm at this size |
| Narrowest part | 3 mm at this size |
| Nodes | 201 curve and line segments |
Measured from the file. PNG: 2,000 × 1,104 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.53 in (25 × 14 mm) | 0.76 mm | 174 mm | 160 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.07 in (51 × 27 mm) | 1.5 mm | 348 mm | 45 | Vinyl, card and thin sheet |
| 3 × 1.6 in (76 × 41 mm) | 2.3 mm | 522 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.14 in (102 × 54 mm) | 3 mm | 696 mm | 10 | Any material, including 3 mm wood and acrylic |
| 6 × 3.2 in (152 × 81 mm) | 4.6 mm | 1,044 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.27 in (203 × 109 mm) | 6.1 mm | 1,392 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.41 in (305 × 163 mm) | 9.1 mm | 2,088 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Rip Some Lip SVG files
-
Rip Some Lip in Alfa Slab One Solid · 12 pieces
-
Rip Some Lip in Amatic SC Solid · 10 pieces
-
Rip Some Lip in block capitals Solid · 10 pieces
-
Rip Some Lip in script and capitals Solid · 9 pieces
-
Rip Some Lip with stars Solid · 13 pieces
-
Rip Some Lip outline lettering Outline · 15 pieces
-
Rip Some Lip stencil plate Solid · one piece
-
Rip Some Lip with a drop shadow Layered · 8 pieces
← Rip Some Lip in Kaushan Script All 13 Rip Some Lip designs Rip Some Lip in Alfa Slab One →