Rip Some Lip in Kaushan Script SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Rip Some Lip” set in Kaushan Script, a lively brush script, on 2 centred lines. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.
What is in the file
| Size | 100 × 61 mm (3.94 × 2.4 in), scales to any size |
|---|---|
| Pieces | 12 separate pieces |
| Outlines to cut | 15: 12 outer edges and 3 cut-outs |
| Cut length | 840 mm at this size |
| Narrowest part | 0.9 mm at this size |
| Nodes | 338 curve and line segments |
Measured from the file. PNG: 2,000 × 1,248 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.61 in (25 × 15 mm) | 0.23 mm | 213 mm | 150 | Too fine for most machines |
| 2 × 1.22 in (51 × 31 mm) | 0.46 mm | 427 mm | 40 | Too fine for most machines |
| 3 × 1.83 in (76 × 46 mm) | 0.69 mm | 640 mm | 18 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.44 in (102 × 62 mm) | 0.91 mm | 853 mm | 8 | Fine detail: vinyl and paper only, weed with care |
| 6 × 3.65 in (152 × 93 mm) | 1.4 mm | 1,280 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.87 in (203 × 124 mm) | 1.8 mm | 1,707 mm | 2 | Vinyl, card and thin sheet |
| 12 × 7.31 in (305 × 186 mm) | 2.7 mm | 2,560 mm | 1 | Vinyl, card and thin sheet |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Rip Some Lip SVG files
-
Rip Some Lip in Lilita One Solid · 12 pieces
-
Rip Some Lip in Alfa Slab One Solid · 12 pieces
-
Rip Some Lip in Amatic SC Solid · 10 pieces
-
Rip Some Lip in block capitals Solid · 10 pieces
-
Rip Some Lip in script and capitals Solid · 9 pieces
-
Rip Some Lip with stars Solid · 13 pieces
-
Rip Some Lip outline lettering Outline · 15 pieces
-
Rip Some Lip stencil plate Solid · one piece
← Rip Some Lip in Lobster All 13 Rip Some Lip designs Rip Some Lip in Lilita One →