Free Papa Bear SVG

Papa Bear outline lettering SVG

Papa Bear outline lettering, drawn as a line — Papa Bear outline lettering. The preview is the SVG file itself.

“Papa Bear” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 83 mm (3.94 × 3.28 in), scales to any size
Pieces	16 separate pieces
Outlines to cut	32: 16 outer edges and 16 cut-outs
Cut length	1,779 mm at this size
Narrowest part	1.4 mm at this size
Nodes	440 curve and line segments

Measured from the file. PNG: 2,000 × 1,681 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.83 in (25 × 21 mm)	0.36 mm	452 mm	110	Too fine for most machines
2 × 1.67 in (51 × 42 mm)	0.71 mm	904 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.5 in (76 × 64 mm)	1.1 mm	1,356 mm	12	Vinyl, card and thin sheet
4 × 3.34 in (102 × 85 mm)	1.4 mm	1,807 mm	6	Vinyl, card and thin sheet
6 × 5 in (152 × 127 mm)	2.1 mm	2,711 mm	2	Vinyl, card and thin sheet
8 × 6.67 in (203 × 169 mm)	2.8 mm	3,615 mm	1	Vinyl, card and thin sheet
12 × 10.01 in (305 × 254 mm)	4.3 mm	5,422 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Papa Bear SVG files

← Papa Bear with stars All 12 Papa Bear designs Papa Bear stencil plate →