Free Papa Bear SVG

Papa Bear in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Papa Bear in Alfa Slab One, as a solid black shape
Papa Bear in Alfa Slab One. The preview is the SVG file itself.

“Papa Bear” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 78 mm (3.94 × 3.06 in), scales to any size
Pieces8 separate pieces
Outlines to cut16: 8 outer edges and 8 cut-outs
Cut length1,002 mm at this size
Narrowest part3.7 mm at this size
Nodes186 curve and line segments

Measured from the file. PNG: 2,000 × 1,571 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.78 in (25 × 20 mm)0.94 mm255 mm120Fine detail: vinyl and paper only, weed with care
2 × 1.55 in (51 × 39 mm)1.9 mm509 mm30Vinyl, card and thin sheet
3 × 2.33 in (76 × 59 mm)2.8 mm764 mm12Vinyl, card and thin sheet
4 × 3.11 in (102 × 79 mm)3.8 mm1,018 mm6Any material, including 3 mm wood and acrylic
6 × 4.66 in (152 × 118 mm)5.6 mm1,527 mm2Any material, including 3 mm wood and acrylic
8 × 6.22 in (203 × 158 mm)7.5 mm2,036 mm1Any material, including 3 mm wood and acrylic
12 × 9.32 in (305 × 237 mm)11 mm3,054 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Papa Bear SVG files

← Papa Bear in Lilita One All 13 Papa Bear designs Papa Bear in Amatic SC →