Free Papa Bear SVG

Papa Bear stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Papa Bear stencil plate, as a solid black shape
Papa Bear stencil plate. The preview is the SVG file itself.

A rounded plate with “PAPA BEAR” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size100 × 90 mm (3.94 × 3.56 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length1,530 mm at this size
Narrowest part1.7 mm at this size
Nodes257 curve and line segments

Measured from the file. PNG: 2,000 × 1,813 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.9 in (25 × 23 mm)0.43 mm389 mm110Too fine for most machines
2 × 1.81 in (51 × 46 mm)0.86 mm777 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.71 in (76 × 69 mm)1.3 mm1,166 mm12Vinyl, card and thin sheet
4 × 3.61 in (102 × 92 mm)1.7 mm1,554 mm6Vinyl, card and thin sheet
6 × 5.42 in (152 × 138 mm)2.6 mm2,332 mm2Vinyl, card and thin sheet
8 × 7.22 in (203 × 183 mm)3.5 mm3,109 mm1Any material, including 3 mm wood and acrylic
12 × 10.84 in (305 × 275 mm)5.2 mm4,663 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Papa Bear SVG files

← Papa Bear outline lettering All 13 Papa Bear designs Papa Bear with a drop shadow →