Papa Bear in Kaushan Script SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Papa Bear” set in Kaushan Script, a lively brush script, on 2 centred lines. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.
What is in the file
| Size | 100 × 100 mm (3.94 × 3.92 in), scales to any size |
|---|---|
| Pieces | 8 separate pieces |
| Outlines to cut | 12: 8 outer edges and 4 cut-outs |
| Cut length | 1,267 mm at this size |
| Narrowest part | 1.8 mm at this size |
| Nodes | 329 curve and line segments |
Measured from the file. PNG: 2,000 × 1,990 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 1 in (25 × 25 mm) | 0.46 mm | 322 mm | 100 | Too fine for most machines |
| 2 × 1.99 in (51 × 51 mm) | 0.91 mm | 644 mm | 25 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.99 in (76 × 76 mm) | 1.4 mm | 965 mm | 9 | Vinyl, card and thin sheet |
| 4 × 3.98 in (102 × 101 mm) | 1.8 mm | 1,287 mm | 4 | Vinyl, card and thin sheet |
| 6 × 5.97 in (152 × 152 mm) | 2.7 mm | 1,931 mm | 1 | Vinyl, card and thin sheet |
| 8 × 7.96 in (203 × 202 mm) | 3.7 mm | 2,575 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.94 in (305 × 303 mm) | 5.5 mm | 3,862 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Papa Bear SVG files
-
Papa Bear in Lilita One Solid · 8 pieces
-
Papa Bear in Alfa Slab One Solid · 8 pieces
-
Papa Bear in Amatic SC Solid · 8 pieces
-
Papa Bear in block capitals Solid · 8 pieces
-
Papa Bear in script and capitals Solid · 6 pieces
-
Papa Bear with stars Solid · 11 pieces
-
Papa Bear outline lettering Outline · 16 pieces
-
Papa Bear stencil plate Solid · one piece
← Papa Bear in Lobster All 13 Papa Bear designs Papa Bear in Lilita One →