Free Papa Bear SVG

Papa Bear in Lobster SVG

Papa Bear in Lobster, as a solid black shape — Papa Bear in Lobster. The preview is the SVG file itself.

“Papa Bear” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	97 × 100 mm (3.82 × 3.94 in), scales to any size
Pieces	5 separate pieces
Outlines to cut	10: 5 outer edges and 5 cut-outs
Cut length	1,137 mm at this size
Narrowest part	1.7 mm at this size
Nodes	301 curve and line segments

Measured from the file. PNG: 1,944 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.97 × 1 in (25 × 25 mm)	0.43 mm	289 mm	100	Too fine for most machines
1.94 × 2 in (49 × 51 mm)	0.86 mm	578 mm	25	Fine detail: vinyl and paper only, weed with care
2.91 × 3 in (74 × 76 mm)	1.3 mm	866 mm	9	Vinyl, card and thin sheet
3.88 × 4 in (99 × 102 mm)	1.7 mm	1,155 mm	4	Vinyl, card and thin sheet
5.83 × 6 in (148 × 152 mm)	2.6 mm	1,733 mm	2	Vinyl, card and thin sheet
7.77 × 8 in (197 × 203 mm)	3.5 mm	2,310 mm	1	Any material, including 3 mm wood and acrylic
11.65 × 12 in (296 × 305 mm)	5.2 mm	3,466 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Papa Bear SVG files

← Papa Bear in Pacifico All 12 Papa Bear designs Papa Bear in Kaushan Script →