Papa Bear in Pacifico SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Papa Bear” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.
What is in the file
| Size | 87 × 100 mm (3.42 × 3.94 in), scales to any size |
|---|---|
| Pieces | 4 separate pieces |
| Outlines to cut | 11: 4 outer edges and 7 cut-outs |
| Cut length | 1,053 mm at this size |
| Narrowest part | 2.4 mm at this size |
| Nodes | 253 curve and line segments |
Measured from the file. PNG: 1,748 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.87 × 1 in (22 × 25 mm) | 0.61 mm | 267 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 1.74 × 2 in (44 × 51 mm) | 1.2 mm | 535 mm | 30 | Vinyl, card and thin sheet |
| 2.61 × 3 in (66 × 76 mm) | 1.8 mm | 802 mm | 12 | Vinyl, card and thin sheet |
| 3.48 × 4 in (88 × 102 mm) | 2.4 mm | 1,070 mm | 6 | Vinyl, card and thin sheet |
| 5.21 × 6 in (132 × 152 mm) | 3.7 mm | 1,605 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.95 × 8 in (177 × 203 mm) | 4.9 mm | 2,140 mm | 1 | Any material, including 3 mm wood and acrylic |
| 10.43 × 12 in (265 × 305 mm) | 7.3 mm | 3,210 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Papa Bear SVG files
-
Papa Bear in Lobster Solid · 5 pieces
-
Papa Bear in Kaushan Script Solid · 8 pieces
-
Papa Bear in Lilita One Solid · 8 pieces
-
Papa Bear in Alfa Slab One Solid · 8 pieces
-
Papa Bear in Amatic SC Solid · 8 pieces
-
Papa Bear in block capitals Solid · 8 pieces
-
Papa Bear in script and capitals Solid · 6 pieces
-
Papa Bear with stars Solid · 11 pieces
← Papa Bear with a bear’s head All 13 Papa Bear designs Papa Bear in Lobster →