Papa Bear with a bear’s head SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Papa Bear” with a bear’s head above the words: the first line in Pacifico script, the rest in narrow capitals, the lines made the same width. The picture is a separate piece, so it can be cut in a second colour or left off.
What is in the file
| Size | 58 × 100 mm (2.26 × 3.94 in), scales to any size |
|---|---|
| Pieces | 7 separate pieces |
| Outlines to cut | 23: 7 outer edges and 16 cut-outs |
| Cut length | 1,098 mm at this size |
| Narrowest part | 1 mm at this size |
| Nodes | 314 curve and line segments |
Measured from the file. PNG: 1,183 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.58 × 1 in (15 × 25 mm) | 0.25 mm | 279 mm | 150 | Too fine for most machines |
| 1.15 × 2 in (29 × 51 mm) | 0.51 mm | 558 mm | 45 | Fine detail: vinyl and paper only, weed with care |
| 1.73 × 3 in (44 × 76 mm) | 0.76 mm | 837 mm | 18 | Fine detail: vinyl and paper only, weed with care |
| 2.3 × 4 in (58 × 102 mm) | 1 mm | 1,116 mm | 8 | Vinyl, card and thin sheet |
| 3.45 × 6 in (88 × 152 mm) | 1.5 mm | 1,673 mm | 3 | Vinyl, card and thin sheet |
| 4.6 × 8 in (117 × 203 mm) | 2 mm | 2,231 mm | 2 | Vinyl, card and thin sheet |
| 6.9 × 12 in (175 × 305 mm) | 3 mm | 3,347 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Papa Bear SVG files
-
Papa Bear in Pacifico Solid · 4 pieces -
Papa Bear in Lobster Solid · 5 pieces -
Papa Bear in Kaushan Script Solid · 8 pieces -
Papa Bear in Lilita One Solid · 8 pieces -
Papa Bear in Alfa Slab One Solid · 8 pieces -
Papa Bear in Amatic SC Solid · 8 pieces -
Papa Bear in block capitals Solid · 8 pieces -
Papa Bear in script and capitals Solid · 6 pieces
← Papa Bear with a drop shadow All 13 Papa Bear designs Papa Bear in Pacifico →