Free Papa Bear SVG

Papa Bear in script and capitals SVG

Papa Bear in script and capitals, as a solid black shape — Papa Bear in script and capitals. The preview is the SVG file itself.

“Papa” in Pacifico script over “BEAR” in narrow capitals, the two lines made the same width. Mixing a script with capitals is the classic sign-painter’s pairing.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	89 × 100 mm (3.52 × 3.94 in), scales to any size
Pieces	6 separate pieces
Outlines to cut	15: 6 outer edges and 9 cut-outs
Cut length	1,297 mm at this size
Narrowest part	2.8 mm at this size
Nodes	201 curve and line segments

Measured from the file. PNG: 1,794 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.89 × 1 in (23 × 25 mm)	0.71 mm	329 mm	110	Fine detail: vinyl and paper only, weed with care
1.79 × 2 in (45 × 51 mm)	1.4 mm	659 mm	30	Vinyl, card and thin sheet
2.68 × 3 in (68 × 76 mm)	2.1 mm	988 mm	12	Vinyl, card and thin sheet
3.57 × 4 in (91 × 102 mm)	2.8 mm	1,318 mm	6	Vinyl, card and thin sheet
5.36 × 6 in (136 × 152 mm)	4.3 mm	1,977 mm	2	Any material, including 3 mm wood and acrylic
7.14 × 8 in (181 × 203 mm)	5.7 mm	2,636 mm	1	Any material, including 3 mm wood and acrylic
10.72 × 12 in (272 × 305 mm)	8.5 mm	3,953 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Papa Bear SVG files

← Papa Bear in block capitals All 12 Papa Bear designs Papa Bear with stars →