Free Papa Bear SVG

Papa Bear with stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Papa Bear with stars, as a solid black shape
Papa Bear with stars. The preview is the SVG file itself.

“Papa Bear” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

What is in the file

Size74 × 100 mm (2.89 × 3.94 in), scales to any size
Pieces11 separate pieces
Outlines to cut16: 11 outer edges and 5 cut-outs
Cut length1,040 mm at this size
Narrowest part1.3 mm at this size
Nodes253 curve and line segments

Measured from the file. PNG: 1,490 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.74 × 1 in (19 × 25 mm)0.33 mm264 mm130Too fine for most machines
1.47 × 2 in (37 × 51 mm)0.66 mm528 mm35Fine detail: vinyl and paper only, weed with care
2.2 × 3 in (56 × 76 mm)0.99 mm792 mm15Fine detail: vinyl and paper only, weed with care
2.94 × 4 in (75 × 102 mm)1.3 mm1,057 mm6Vinyl, card and thin sheet
4.41 × 6 in (112 × 152 mm)2 mm1,585 mm2Vinyl, card and thin sheet
5.88 × 8 in (149 × 203 mm)2.6 mm2,113 mm2Vinyl, card and thin sheet
8.82 × 12 in (224 × 305 mm)4 mm3,170 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Papa Bear SVG files

← Papa Bear in script and capitals All 13 Papa Bear designs Papa Bear outline lettering →