Papa Bear in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Papa Bear” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 87 mm (3.94 × 3.41 in), scales to any size |
|---|---|
| Pieces | 8 separate pieces |
| Outlines to cut | 16: 8 outer edges and 8 cut-outs |
| Cut length | 943 mm at this size |
| Narrowest part | 5 mm at this size |
| Nodes | 207 curve and line segments |
Measured from the file. PNG: 2,000 × 1,740 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.87 in (25 × 22 mm) | 1.3 mm | 240 mm | 110 | Vinyl, card and thin sheet |
| 2 × 1.73 in (51 × 44 mm) | 2.5 mm | 479 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.6 in (76 × 66 mm) | 3.8 mm | 719 mm | 12 | Any material, including 3 mm wood and acrylic |
| 4 × 3.46 in (102 × 88 mm) | 5.1 mm | 958 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 5.19 in (152 × 132 mm) | 7.6 mm | 1,437 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.92 in (203 × 176 mm) | 10 mm | 1,916 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.38 in (305 × 264 mm) | 15 mm | 2,874 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Papa Bear SVG files
-
Papa Bear in Alfa Slab One Solid · 8 pieces
-
Papa Bear in Amatic SC Solid · 8 pieces
-
Papa Bear in block capitals Solid · 8 pieces
-
Papa Bear in script and capitals Solid · 6 pieces
-
Papa Bear with stars Solid · 11 pieces
-
Papa Bear outline lettering Outline · 16 pieces
-
Papa Bear stencil plate Solid · one piece
-
Papa Bear with a drop shadow Layered · 7 pieces
← Papa Bear in Kaushan Script All 13 Papa Bear designs Papa Bear in Alfa Slab One →