Papa Bear with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Papa Bear” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 87 × 100 mm (3.44 × 3.94 in), scales to any size |
|---|---|
| Pieces | 7 separate pieces |
| Outlines to cut | 24: 7 outer edges and 17 cut-outs |
| Cut length | 1,908 mm at this size |
| Narrowest part | 1.4 mm at this size |
| Nodes | 433 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 1,756 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.87 × 1 in (22 × 25 mm) | 0.36 mm | 485 mm | 110 | Too fine for most machines |
| 1.75 × 2 in (44 × 51 mm) | 0.71 mm | 969 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 2.62 × 3 in (67 × 76 mm) | 1.1 mm | 1,454 mm | 12 | Vinyl, card and thin sheet |
| 3.49 × 4 in (89 × 102 mm) | 1.4 mm | 1,939 mm | 6 | Vinyl, card and thin sheet |
| 5.24 × 6 in (133 × 152 mm) | 2.1 mm | 2,908 mm | 2 | Vinyl, card and thin sheet |
| 6.98 × 8 in (177 × 203 mm) | 2.8 mm | 3,877 mm | 1 | Vinyl, card and thin sheet |
| 10.48 × 12 in (266 × 305 mm) | 4.3 mm | 5,816 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Papa Bear SVG files
-
Papa Bear with a bear’s head Solid · 7 pieces
-
Papa Bear in Pacifico Solid · 4 pieces
-
Papa Bear in Lobster Solid · 5 pieces
-
Papa Bear in Kaushan Script Solid · 8 pieces
-
Papa Bear in Lilita One Solid · 8 pieces
-
Papa Bear in Alfa Slab One Solid · 8 pieces
-
Papa Bear in Amatic SC Solid · 8 pieces
-
Papa Bear in block capitals Solid · 8 pieces
← Papa Bear stencil plate All 13 Papa Bear designs Papa Bear with a bear’s head →