Free dolphin SVG

Dolphin silhouette SVG

Dolphin silhouette, as a solid black shape — Dolphin silhouette. The preview is the SVG file itself.

The dolphin as a solid shape with no inside cuts, facing left and diving back towards the water. For small decals, stencils, glitter card and thick materials.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 55 mm (3.94 × 2.18 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	292 mm at this size
Narrowest part	5.6 mm at this size
Nodes	89 curve and line segments

Measured from the file. PNG: 2,000 × 1,142 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.55 in (25 × 14 mm)	1.4 mm	74 mm	160	Vinyl, card and thin sheet
2 × 1.11 in (51 × 28 mm)	2.8 mm	148 mm	45	Vinyl, card and thin sheet
3 × 1.66 in (76 × 42 mm)	4.3 mm	223 mm	18	Any material, including 3 mm wood and acrylic
4 × 2.22 in (102 × 56 mm)	5.7 mm	297 mm	10	Any material, including 3 mm wood and acrylic
6 × 3.32 in (152 × 84 mm)	8.5 mm	445 mm	3	Any material, including 3 mm wood and acrylic
8 × 4.43 in (203 × 113 mm)	11 mm	593 mm	2	Any material, including 3 mm wood and acrylic
12 × 6.65 in (305 × 169 mm)	17 mm	890 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dolphin SVG files

← Leaping dolphin All 13 dolphins Dolphin outline →