Free dolphin SVG

Dolphin against the sun SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Dolphin against the sun, as a solid black shape
Dolphin against the sun. The preview is the SVG file itself.

A round sun with a leaping dolphin cut out of it and three bands of sea across the bottom. Cut the disc in orange or gold and lay it on a dark background.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length910 mm at this size
Narrowest part1 mm at this size
Nodes120 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.25 mm231 mm100Too fine for most machines
2 × 2 in (51 × 51 mm)0.51 mm462 mm25Fine detail: vinyl and paper only, weed with care
3 × 3 in (76 × 76 mm)0.76 mm693 mm9Fine detail: vinyl and paper only, weed with care
4 × 4 in (102 × 102 mm)1 mm925 mm4Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)1.5 mm1,387 mm1Vinyl, card and thin sheet
8 × 8 in (203 × 203 mm)2 mm1,849 mm1Vinyl, card and thin sheet
12 × 12 in (305 × 305 mm)3 mm2,774 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dolphin SVG files

← Dolphin over a monogram ring All 13 dolphins Mandala dolphin →