Free dolphin SVG

Dolphin outline SVG

Dolphin outline, drawn as a line — Dolphin outline. The preview is the SVG file itself.

A leaping dolphin drawn as one even line, with the mouth, the flipper and the stripe that runs from flipper to eye, so the eye stays joined to the rest. One piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 62 mm (3.94 × 2.44 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	590 mm at this size
Narrowest part	1.6 mm at this size
Nodes	199 curve and line segments

Measured from the file. PNG: 2,000 × 1,269 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.62 in (25 × 16 mm)	0.41 mm	150 mm	140	Too fine for most machines
2 × 1.24 in (51 × 31 mm)	0.81 mm	300 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.86 in (76 × 47 mm)	1.2 mm	450 mm	15	Vinyl, card and thin sheet
4 × 2.48 in (102 × 63 mm)	1.6 mm	599 mm	8	Vinyl, card and thin sheet
6 × 3.72 in (152 × 94 mm)	2.4 mm	899 mm	3	Vinyl, card and thin sheet
8 × 4.96 in (203 × 126 mm)	3.3 mm	1,199 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.44 in (305 × 189 mm)	4.9 mm	1,798 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dolphin SVG files

← Dolphin silhouette All 13 dolphins Swimming dolphin →