Free dolphin SVG

Swimming dolphin SVG

Swimming dolphin, as a solid black shape — Swimming dolphin. The preview is the SVG file itself.

A dolphin stretched out level as it swims, facing left, with its mouth line and eye cut and no other detail. Long and low, for the side of a tumbler or a row along a wall.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 48 mm (3.94 × 1.9 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	310 mm at this size
Narrowest part	2.8 mm at this size
Nodes	114 curve and line segments

Measured from the file. PNG: 2,000 × 1,006 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.48 in (25 × 12 mm)	0.71 mm	79 mm	170	Fine detail: vinyl and paper only, weed with care
2 × 0.97 in (51 × 25 mm)	1.4 mm	157 mm	50	Vinyl, card and thin sheet
3 × 1.45 in (76 × 37 mm)	2.1 mm	236 mm	21	Vinyl, card and thin sheet
4 × 1.93 in (102 × 49 mm)	2.8 mm	315 mm	10	Vinyl, card and thin sheet
6 × 2.9 in (152 × 74 mm)	4.3 mm	472 mm	3	Any material, including 3 mm wood and acrylic
8 × 3.86 in (203 × 98 mm)	5.7 mm	630 mm	3	Any material, including 3 mm wood and acrylic
12 × 5.8 in (305 × 147 mm)	8.5 mm	945 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dolphin SVG files

← Dolphin outline All 13 dolphins Baby dolphin →