Free dolphin SVG

Two dolphins face to face SVG

Two dolphins face to face, as a solid black shape — Two dolphins face to face. The preview is the SVG file itself.

Two dolphins rise facing each other with their beaks touching at the top and their tails crossed at the bottom, exactly mirrored. For weddings, anniversaries and twin birthdays.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 84 mm (3.94 × 3.31 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	580 mm at this size
Narrowest part	2.8 mm at this size
Nodes	215 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,694 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.84 in (25 × 21 mm)	0.71 mm	147 mm	110	Fine detail: vinyl and paper only, weed with care
2 × 1.68 in (51 × 43 mm)	1.4 mm	295 mm	30	Vinyl, card and thin sheet
3 × 2.52 in (76 × 64 mm)	2.1 mm	442 mm	12	Vinyl, card and thin sheet
4 × 3.36 in (102 × 85 mm)	2.8 mm	589 mm	6	Vinyl, card and thin sheet
6 × 5.05 in (152 × 128 mm)	4.3 mm	884 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.73 in (203 × 171 mm)	5.7 mm	1,179 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.09 in (305 × 256 mm)	8.5 mm	1,768 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dolphin SVG files

← Dolphin in a heart All 13 dolphins Dolphin over a monogram ring →