Free dolphin SVG

Dolphin in a heart SVG

Dolphin in a heart, as a solid black shape — Dolphin in a heart. The preview is the SVG file itself.

A dolphin leaps through an open heart, joined to it at the beak, the back fin and the tail. One piece, for Valentine cards, memorial pieces and gifts for anyone who loves the sea.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 89 mm (3.94 × 3.5 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	8: 1 outer edge and 7 cut-outs
Cut length	988 mm at this size
Narrowest part	3.1 mm at this size
Nodes	265 curve and line segments

Measured from the file. PNG: 2,000 × 1,788 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.89 in (25 × 23 mm)	0.79 mm	251 mm	110	Fine detail: vinyl and paper only, weed with care
2 × 1.78 in (51 × 45 mm)	1.6 mm	502 mm	30	Vinyl, card and thin sheet
3 × 2.67 in (76 × 68 mm)	2.4 mm	753 mm	12	Vinyl, card and thin sheet
4 × 3.56 in (102 × 90 mm)	3.1 mm	1,004 mm	6	Any material, including 3 mm wood and acrylic
6 × 5.34 in (152 × 136 mm)	4.7 mm	1,506 mm	2	Any material, including 3 mm wood and acrylic
8 × 7.12 in (203 × 181 mm)	6.3 mm	2,008 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.68 in (305 × 271 mm)	9.4 mm	3,011 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dolphin SVG files

← Two dolphins leaping from the sea All 13 dolphins Two dolphins face to face →