Free dolphin SVG

Dolphin over a monogram ring SVG

Dolphin over a monogram ring, as a solid black shape — Dolphin over a monogram ring. The preview is the SVG file itself.

A dolphin arches over an open ring, touching it with its belly and tail. The ring is left empty for an initial or a short name.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	95 × 100 mm (3.74 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	661 mm at this size
Narrowest part	2.9 mm at this size
Nodes	149 curve and line segments

Measured from the file. PNG: 1,904 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.95 × 1 in (24 × 25 mm)	0.74 mm	168 mm	100	Fine detail: vinyl and paper only, weed with care
1.9 × 2 in (48 × 51 mm)	1.5 mm	336 mm	25	Vinyl, card and thin sheet
2.85 × 3 in (72 × 76 mm)	2.2 mm	504 mm	12	Vinyl, card and thin sheet
3.8 × 4 in (97 × 102 mm)	2.9 mm	672 mm	6	Vinyl, card and thin sheet
5.7 × 6 in (145 × 152 mm)	4.4 mm	1,007 mm	2	Any material, including 3 mm wood and acrylic
7.6 × 8 in (193 × 203 mm)	5.9 mm	1,343 mm	1	Any material, including 3 mm wood and acrylic
11.4 × 12 in (290 × 305 mm)	8.8 mm	2,015 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dolphin SVG files

← Two dolphins face to face All 13 dolphins Dolphin against the sun →