Free dolphin SVG

Leaping dolphin SVG

Leaping dolphin, as a solid black shape — Leaping dolphin. The preview is the SVG file itself.

A bottlenose dolphin at the top of its jump: beak, smiling mouth line, eye, curved back fin, flipper and flukes, with a line cut between its back and its pale belly.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 63 mm (3.94 × 2.47 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	439 mm at this size
Narrowest part	3 mm at this size
Nodes	136 curve and line segments

Measured from the file. PNG: 2,000 × 1,283 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.63 in (25 × 16 mm)	0.76 mm	112 mm	140	Fine detail: vinyl and paper only, weed with care
2 × 1.25 in (51 × 32 mm)	1.5 mm	223 mm	40	Vinyl, card and thin sheet
3 × 1.88 in (76 × 48 mm)	2.3 mm	335 mm	15	Vinyl, card and thin sheet
4 × 2.51 in (102 × 64 mm)	3 mm	446 mm	8	Any material, including 3 mm wood and acrylic
6 × 3.76 in (152 × 96 mm)	4.6 mm	669 mm	3	Any material, including 3 mm wood and acrylic
8 × 5.02 in (203 × 127 mm)	6.1 mm	892 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.52 in (305 × 191 mm)	9.1 mm	1,338 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dolphin SVG files

← Pod of three dolphins All 13 dolphins Dolphin silhouette →