Free dolphin SVG

Pod of three dolphins SVG

Pod of three dolphins, as a solid black shape — Pod of three dolphins. The preview is the SVG file itself.

Three dolphins at three sizes, each at a different point of its jump. Loose pieces to scatter across a bathroom wall, a beach bag or a party table.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	97 × 100 mm (3.83 × 3.94 in), scales to any size
Pieces	3 separate pieces
Outlines to cut	3 outlines
Cut length	546 mm at this size
Narrowest part	3.1 mm at this size
Nodes	214 curve and line segments

Measured from the file. PNG: 1,950 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.97 × 1 in (25 × 25 mm)	0.79 mm	139 mm	100	Fine detail: vinyl and paper only, weed with care
1.95 × 2 in (49 × 51 mm)	1.6 mm	277 mm	25	Vinyl, card and thin sheet
2.92 × 3 in (74 × 76 mm)	2.4 mm	416 mm	9	Vinyl, card and thin sheet
3.9 × 4 in (99 × 102 mm)	3.1 mm	555 mm	4	Any material, including 3 mm wood and acrylic
5.84 × 6 in (148 × 152 mm)	4.7 mm	832 mm	2	Any material, including 3 mm wood and acrylic
7.79 × 8 in (198 × 203 mm)	6.3 mm	1,109 mm	1	Any material, including 3 mm wood and acrylic
11.69 × 12 in (297 × 305 mm)	9.4 mm	1,664 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dolphin SVG files

← Tribal dolphin All 13 dolphins Leaping dolphin →