Free dolphin SVG

Two dolphins leaping from the sea SVG

Two dolphins leaping from the sea, as a solid black shape — Two dolphins leaping from the sea. The preview is the SVG file itself.

Two dolphins jump one after the other out of a strip of sea, the leader larger and higher. Both tails stay in the water, so the whole scene is one piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 64 mm (3.94 × 2.52 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	7: 1 outer edge and 6 cut-outs
Cut length	866 mm at this size
Narrowest part	1.8 mm at this size
Nodes	314 curve and line segments

Measured from the file. PNG: 2,000 × 1,310 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.64 in (25 × 16 mm)	0.46 mm	220 mm	140	Too fine for most machines
2 × 1.28 in (51 × 33 mm)	0.91 mm	440 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.92 in (76 × 49 mm)	1.4 mm	660 mm	15	Vinyl, card and thin sheet
4 × 2.56 in (102 × 65 mm)	1.8 mm	880 mm	8	Vinyl, card and thin sheet
6 × 3.85 in (152 × 98 mm)	2.7 mm	1,320 mm	3	Vinyl, card and thin sheet
8 × 5.13 in (203 × 130 mm)	3.7 mm	1,760 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.69 in (305 × 195 mm)	5.5 mm	2,640 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dolphin SVG files

← Baby dolphin All 13 dolphins Dolphin in a heart →