Mandala dolphin SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A leaping dolphin with its body filled by alternating rows of petals and dots, mandala fashion, and a plain head and fins. Cut it at full size and weed with a pin.
What is in the file
| Size | 100 × 54 mm (3.94 × 2.11 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 24: 1 outer edge and 23 cut-outs |
| Cut length | 550 mm at this size |
| Narrowest part | 1.3 mm at this size |
| Nodes | 238 curve and line segments |
Measured from the file. PNG: 2,000 × 1,110 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.54 in (25 × 14 mm) | 0.33 mm | 140 mm | 160 | Too fine for most machines |
| 2 × 1.07 in (51 × 27 mm) | 0.66 mm | 279 mm | 45 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.61 in (76 × 41 mm) | 0.99 mm | 419 mm | 18 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.15 in (102 × 55 mm) | 1.3 mm | 559 mm | 10 | Vinyl, card and thin sheet |
| 6 × 3.22 in (152 × 82 mm) | 2 mm | 838 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.3 in (203 × 109 mm) | 2.6 mm | 1,118 mm | 2 | Vinyl, card and thin sheet |
| 12 × 6.44 in (305 × 164 mm) | 4 mm | 1,676 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.