Free Dad to Be SVG

Dad to Be stencil plate SVG

Dad to Be stencil plate, as a solid black shape — Dad to Be stencil plate. The preview is the SVG file itself.

A rounded plate with “DAD TO BE” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 98 mm (3.94 × 3.85 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	8: 1 outer edge and 7 cut-outs
Cut length	1,474 mm at this size
Narrowest part	1.7 mm at this size
Nodes	181 curve and line segments

Measured from the file. PNG: 2,000 × 1,956 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.98 in (25 × 25 mm)	0.43 mm	374 mm	100	Too fine for most machines
2 × 1.95 in (51 × 50 mm)	0.86 mm	749 mm	25	Fine detail: vinyl and paper only, weed with care
3 × 2.93 in (76 × 74 mm)	1.3 mm	1,123 mm	9	Vinyl, card and thin sheet
4 × 3.91 in (102 × 99 mm)	1.7 mm	1,498 mm	4	Vinyl, card and thin sheet
6 × 5.86 in (152 × 149 mm)	2.6 mm	2,246 mm	2	Vinyl, card and thin sheet
8 × 7.82 in (203 × 199 mm)	3.5 mm	2,995 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.72 in (305 × 298 mm)	5.2 mm	4,493 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Dad to Be SVG files

← Dad to Be outline lettering All 12 Dad to Be designs Dad to Be with a drop shadow →