Dad to Be with a pair of baby feet SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Dad to Be” with a pair of baby feet above the words: the first line in Pacifico script, the rest in narrow capitals, the lines made the same width. The picture is a separate piece, so it can be cut in a second colour or left off.
What is in the file
| Size | 64 × 100 mm (2.51 × 3.94 in), scales to any size |
|---|---|
| Pieces | 18 separate pieces |
| Outlines to cut | 24: 18 outer edges and 6 cut-outs |
| Cut length | 1,054 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 218 curve and line segments |
Measured from the file. PNG: 1,302 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.64 × 1 in (16 × 25 mm) | 0.53 mm | 268 mm | 140 | Fine detail: vinyl and paper only, weed with care |
| 1.27 × 2 in (32 × 51 mm) | 1.1 mm | 535 mm | 40 | Vinyl, card and thin sheet |
| 1.91 × 3 in (49 × 76 mm) | 1.6 mm | 803 mm | 15 | Vinyl, card and thin sheet |
| 2.55 × 4 in (65 × 102 mm) | 2.1 mm | 1,071 mm | 8 | Vinyl, card and thin sheet |
| 3.82 × 6 in (97 × 152 mm) | 3.2 mm | 1,606 mm | 3 | Any material, including 3 mm wood and acrylic |
| 5.1 × 8 in (129 × 203 mm) | 4.3 mm | 2,142 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.64 × 12 in (194 × 305 mm) | 6.4 mm | 3,213 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Dad to Be SVG files
-
Dad to Be in Pacifico Solid · 5 pieces -
Dad to Be in Lobster Solid · 5 pieces -
Dad to Be in Kaushan Script Solid · 7 pieces -
Dad to Be in Lilita One Solid · 7 pieces -
Dad to Be in Alfa Slab One Solid · 7 pieces -
Dad to Be in Amatic SC Solid · 7 pieces -
Dad to Be in block capitals Solid · 7 pieces -
Dad to Be in script and capitals Solid · 6 pieces
← Dad to Be with a drop shadow All 13 Dad to Be designs Dad to Be in Pacifico →