Free Dad to Be SVG

Dad to Be in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Dad to Be in Amatic SC, as a solid black shape
Dad to Be in Amatic SC. The preview is the SVG file itself.

“Dad to Be” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size69 × 100 mm (2.71 × 3.94 in), scales to any size
Pieces7 separate pieces
Outlines to cut13: 7 outer edges and 6 cut-outs
Cut length1,007 mm at this size
Narrowest part2.4 mm at this size
Nodes252 curve and line segments

Measured from the file. PNG: 1,400 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.69 × 1 in (17 × 25 mm)0.61 mm256 mm130Fine detail: vinyl and paper only, weed with care
1.38 × 2 in (35 × 51 mm)1.2 mm512 mm35Vinyl, card and thin sheet
2.06 × 3 in (52 × 76 mm)1.8 mm767 mm15Vinyl, card and thin sheet
2.75 × 4 in (70 × 102 mm)2.4 mm1,023 mm8Vinyl, card and thin sheet
4.13 × 6 in (105 × 152 mm)3.7 mm1,535 mm2Any material, including 3 mm wood and acrylic
5.5 × 8 in (140 × 203 mm)4.9 mm2,046 mm2Any material, including 3 mm wood and acrylic
8.26 × 12 in (210 × 305 mm)7.3 mm3,069 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Dad to Be SVG files

← Dad to Be in Alfa Slab One All 13 Dad to Be designs Dad to Be in block capitals →