Free Dad to Be SVG

Dad to Be in Pacifico SVG

Dad to Be in Pacifico, as a solid black shape — Dad to Be in Pacifico. The preview is the SVG file itself.

“Dad to Be” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	91 × 100 mm (3.59 × 3.94 in), scales to any size
Pieces	5 separate pieces
Outlines to cut	11: 5 outer edges and 6 cut-outs
Cut length	963 mm at this size
Narrowest part	2.7 mm at this size
Nodes	310 curve and line segments

Measured from the file. PNG: 1,831 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.91 × 1 in (23 × 25 mm)	0.69 mm	245 mm	100	Fine detail: vinyl and paper only, weed with care
1.82 × 2 in (46 × 51 mm)	1.4 mm	489 mm	30	Vinyl, card and thin sheet
2.74 × 3 in (69 × 76 mm)	2.1 mm	734 mm	12	Vinyl, card and thin sheet
3.65 × 4 in (93 × 102 mm)	2.7 mm	978 mm	6	Vinyl, card and thin sheet
5.47 × 6 in (139 × 152 mm)	4.1 mm	1,468 mm	2	Any material, including 3 mm wood and acrylic
7.3 × 8 in (185 × 203 mm)	5.5 mm	1,957 mm	1	Any material, including 3 mm wood and acrylic
10.94 × 12 in (278 × 305 mm)	8.2 mm	2,935 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Dad to Be SVG files

← Dad to Be with a drop shadow All 12 Dad to Be designs Dad to Be in Lobster →