Free Dad to Be SVG

Dad to Be in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Dad to Be in Alfa Slab One, as a solid black shape
Dad to Be in Alfa Slab One. The preview is the SVG file itself.

“Dad to Be” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 73 mm (3.94 × 2.88 in), scales to any size
Pieces7 separate pieces
Outlines to cut14: 7 outer edges and 7 cut-outs
Cut length824 mm at this size
Narrowest part3.5 mm at this size
Nodes149 curve and line segments

Measured from the file. PNG: 2,000 × 1,483 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.73 in (25 × 19 mm)0.89 mm209 mm130Fine detail: vinyl and paper only, weed with care
2 × 1.46 in (51 × 37 mm)1.8 mm419 mm35Vinyl, card and thin sheet
3 × 2.19 in (76 × 56 mm)2.7 mm628 mm15Vinyl, card and thin sheet
4 × 2.92 in (102 × 74 mm)3.6 mm837 mm6Any material, including 3 mm wood and acrylic
6 × 4.39 in (152 × 111 mm)5.3 mm1,256 mm2Any material, including 3 mm wood and acrylic
8 × 5.85 in (203 × 149 mm)7.1 mm1,674 mm2Any material, including 3 mm wood and acrylic
12 × 8.77 in (305 × 223 mm)11 mm2,512 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Dad to Be SVG files

← Dad to Be in Lilita One All 13 Dad to Be designs Dad to Be in Amatic SC →