Free Dad to Be SVG

Dad to Be with stars SVG

Dad to Be with stars, as a solid black shape — Dad to Be with stars. The preview is the SVG file itself.

“Dad to Be” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	69 × 100 mm (2.7 × 3.94 in), scales to any size
Pieces	11 separate pieces
Outlines to cut	15: 11 outer edges and 4 cut-outs
Cut length	976 mm at this size
Narrowest part	1.5 mm at this size
Nodes	309 curve and line segments

Measured from the file. PNG: 1,398 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.69 × 1 in (17 × 25 mm)	0.38 mm	248 mm	130	Too fine for most machines
1.37 × 2 in (35 × 51 mm)	0.76 mm	496 mm	35	Fine detail: vinyl and paper only, weed with care
2.06 × 3 in (52 × 76 mm)	1.1 mm	744 mm	15	Vinyl, card and thin sheet
2.75 × 4 in (70 × 102 mm)	1.5 mm	992 mm	8	Vinyl, card and thin sheet
4.12 × 6 in (105 × 152 mm)	2.3 mm	1,487 mm	2	Vinyl, card and thin sheet
5.5 × 8 in (140 × 203 mm)	3 mm	1,983 mm	2	Any material, including 3 mm wood and acrylic
8.24 × 12 in (209 × 305 mm)	4.6 mm	2,975 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Dad to Be SVG files

← Dad to Be in script and capitals All 12 Dad to Be designs Dad to Be outline lettering →