Free Dad to Be SVG

Dad to Be with a drop shadow SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Dad to Be with a drop shadow, in layered colours
Dad to Be with a drop shadow. The preview is the SVG file itself.

“Dad to Be” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

What is in the file

Size91 × 100 mm (3.6 × 3.94 in), scales to any size
Pieces9 separate pieces
Outlines to cut22: 9 outer edges and 13 cut-outs
Cut length1,761 mm at this size
Narrowest part3.6 mm at this size
Nodes387 curve and line segments
Layers2: shadow and words

Measured from the file. PNG: 1,835 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.91 × 1 in (23 × 25 mm)0.91 mm447 mm100Fine detail: vinyl and paper only, weed with care
1.83 × 2 in (46 × 51 mm)1.8 mm895 mm30Vinyl, card and thin sheet
2.74 × 3 in (70 × 76 mm)2.7 mm1,342 mm12Vinyl, card and thin sheet
3.66 × 4 in (93 × 102 mm)3.7 mm1,789 mm6Any material, including 3 mm wood and acrylic
5.48 × 6 in (139 × 152 mm)5.5 mm2,684 mm2Any material, including 3 mm wood and acrylic
7.31 × 8 in (186 × 203 mm)7.3 mm3,578 mm1Any material, including 3 mm wood and acrylic
10.97 × 12 in (279 × 305 mm)11 mm5,368 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Dad to Be SVG files

← Dad to Be stencil plate All 13 Dad to Be designs Dad to Be with a pair of baby feet →