Free Dad to Be SVG

Dad to Be in Lilita One SVG

Dad to Be in Lilita One, as a solid black shape — Dad to Be in Lilita One. The preview is the SVG file itself.

“Dad to Be” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 86 mm (3.94 × 3.37 in), scales to any size
Pieces	7 separate pieces
Outlines to cut	14: 7 outer edges and 7 cut-outs
Cut length	824 mm at this size
Narrowest part	5.8 mm at this size
Nodes	204 curve and line segments

Measured from the file. PNG: 2,000 × 1,723 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.86 in (25 × 22 mm)	1.5 mm	209 mm	110	Vinyl, card and thin sheet
2 × 1.71 in (51 × 43 mm)	2.9 mm	419 mm	30	Vinyl, card and thin sheet
3 × 2.57 in (76 × 65 mm)	4.4 mm	628 mm	12	Any material, including 3 mm wood and acrylic
4 × 3.42 in (102 × 87 mm)	5.9 mm	837 mm	6	Any material, including 3 mm wood and acrylic
6 × 5.14 in (152 × 130 mm)	8.8 mm	1,256 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.85 in (203 × 174 mm)	12 mm	1,674 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.27 in (305 × 261 mm)	18 mm	2,512 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Dad to Be SVG files

← Dad to Be in Kaushan Script All 12 Dad to Be designs Dad to Be in Alfa Slab One →