Free Dad to Be SVG

Dad to Be in script and capitals SVG

Dad to Be in script and capitals, as a solid black shape — Dad to Be in script and capitals. The preview is the SVG file itself.

“Dad” in Pacifico script over “TO BE” in narrow capitals, the two lines made the same width. Mixing a script with capitals is the classic sign-painter’s pairing.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	99 × 100 mm (3.91 × 3.94 in), scales to any size
Pieces	6 separate pieces
Outlines to cut	12: 6 outer edges and 6 cut-outs
Cut length	1,283 mm at this size
Narrowest part	3.6 mm at this size
Nodes	170 curve and line segments

Measured from the file. PNG: 1,987 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.99 × 1 in (25 × 25 mm)	0.91 mm	326 mm	100	Fine detail: vinyl and paper only, weed with care
1.99 × 2 in (50 × 51 mm)	1.8 mm	652 mm	25	Vinyl, card and thin sheet
2.98 × 3 in (76 × 76 mm)	2.7 mm	978 mm	9	Vinyl, card and thin sheet
3.97 × 4 in (101 × 102 mm)	3.7 mm	1,304 mm	4	Any material, including 3 mm wood and acrylic
5.96 × 6 in (151 × 152 mm)	5.5 mm	1,955 mm	1	Any material, including 3 mm wood and acrylic
7.94 × 8 in (202 × 203 mm)	7.3 mm	2,607 mm	1	Any material, including 3 mm wood and acrylic
11.92 × 12 in (303 × 305 mm)	11 mm	3,911 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Dad to Be SVG files

← Dad to Be in block capitals All 12 Dad to Be designs Dad to Be with stars →