Free Dad to Be SVG

Dad to Be outline lettering SVG

Dad to Be outline lettering, drawn as a line — Dad to Be outline lettering. The preview is the SVG file itself.

“Dad to Be” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 81 mm (3.94 × 3.19 in), scales to any size
Pieces	14 separate pieces
Outlines to cut	28: 14 outer edges and 14 cut-outs
Cut length	1,530 mm at this size
Narrowest part	1.4 mm at this size
Nodes	339 curve and line segments

Measured from the file. PNG: 2,000 × 1,637 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.81 in (25 × 21 mm)	0.36 mm	389 mm	120	Too fine for most machines
2 × 1.62 in (51 × 41 mm)	0.71 mm	777 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.43 in (76 × 62 mm)	1.1 mm	1,166 mm	12	Vinyl, card and thin sheet
4 × 3.24 in (102 × 82 mm)	1.4 mm	1,554 mm	6	Vinyl, card and thin sheet
6 × 4.87 in (152 × 124 mm)	2.1 mm	2,332 mm	2	Vinyl, card and thin sheet
8 × 6.49 in (203 × 165 mm)	2.8 mm	3,109 mm	1	Vinyl, card and thin sheet
12 × 9.73 in (305 × 247 mm)	4.3 mm	4,663 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Dad to Be SVG files

← Dad to Be with stars All 12 Dad to Be designs Dad to Be stencil plate →