Free Dad to Be SVG

Dad to Be in Kaushan Script SVG

Dad to Be in Kaushan Script, as a solid black shape — Dad to Be in Kaushan Script. The preview is the SVG file itself.

“Dad to Be” set in Kaushan Script, a lively brush script, on 2 centred lines. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 99 mm (3.94 × 3.9 in), scales to any size
Pieces	7 separate pieces
Outlines to cut	13: 7 outer edges and 6 cut-outs
Cut length	1,106 mm at this size
Narrowest part	1.9 mm at this size
Nodes	326 curve and line segments

Measured from the file. PNG: 2,000 × 1,983 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.99 in (25 × 25 mm)	0.48 mm	281 mm	100	Too fine for most machines
2 × 1.98 in (51 × 50 mm)	0.97 mm	562 mm	25	Fine detail: vinyl and paper only, weed with care
3 × 2.97 in (76 × 76 mm)	1.4 mm	843 mm	9	Vinyl, card and thin sheet
4 × 3.96 in (102 × 101 mm)	1.9 mm	1,124 mm	4	Vinyl, card and thin sheet
6 × 5.95 in (152 × 151 mm)	2.9 mm	1,686 mm	1	Vinyl, card and thin sheet
8 × 7.93 in (203 × 201 mm)	3.9 mm	2,247 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.89 in (305 × 302 mm)	5.8 mm	3,371 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Dad to Be SVG files

← Dad to Be in Lobster All 12 Dad to Be designs Dad to Be in Lilita One →