Free Dad to Be SVG

Dad to Be in Lobster SVG

Dad to Be in Lobster, as a solid black shape — Dad to Be in Lobster. The preview is the SVG file itself.

“Dad to Be” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	91 × 100 mm (3.57 × 3.94 in), scales to any size
Pieces	5 separate pieces
Outlines to cut	9: 5 outer edges and 4 cut-outs
Cut length	1,054 mm at this size
Narrowest part	2 mm at this size
Nodes	281 curve and line segments

Measured from the file. PNG: 1,823 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.91 × 1 in (23 × 25 mm)	0.51 mm	268 mm	110	Fine detail: vinyl and paper only, weed with care
1.82 × 2 in (46 × 51 mm)	1 mm	535 mm	30	Vinyl, card and thin sheet
2.72 × 3 in (69 × 76 mm)	1.5 mm	803 mm	12	Vinyl, card and thin sheet
3.63 × 4 in (92 × 102 mm)	2 mm	1,071 mm	6	Vinyl, card and thin sheet
5.45 × 6 in (138 × 152 mm)	3 mm	1,606 mm	2	Any material, including 3 mm wood and acrylic
7.26 × 8 in (185 × 203 mm)	4.1 mm	2,142 mm	1	Any material, including 3 mm wood and acrylic
10.9 × 12 in (277 × 305 mm)	6.1 mm	3,213 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Dad to Be SVG files

← Dad to Be in Pacifico All 12 Dad to Be designs Dad to Be in Kaushan Script →